1/32 Decals Bf 109E-7 Trop, El Daba Libya 1942

HGW - Messerschmitt Bf-109E-7 Trop S9+CS 1/32 Suitable for Dragon, Hasegawa, HGW, Hobby 2000 kits.
The preparation of the surface prior to the application of the Hgw Wet Transfer:
The Hgw Wet Transfer technology has been tested on Gunze brand paints and preparations.
Carry out the test (not on the model), if you are applying to paint made by a different manufacturer.
We recommend to spray the surface with a glossy varnish in order to achieve a perfect result.
No matter whether you are applying the transfer onto paint or varnish, it is advisable to go over the surface using sandpaper of a grade from 6 000 to 8 000.
Naturally, it is also essential to ensure that the base is clean, grease-free and clear of dust.
You will need:
a scalpel,
sharp tweezers,
the Mr. Mark Softer product by Gunze,
a cotton bud and clean cloth.
Step by Step:
1. Cut out the required design using a sharp scalpel.

wet-transfers
2. Soak the base paper in warm water (approx. 20 sec).

wet-transfers
3. Remove the transfer from the base paper.

wet-transfers
4. Apply a layer of Mr. Mark Softer on the surface where you intend to apply the transfer.

wet-transfers
5. Place the transfer in the required position on the layer of Mr. Mark Softer.

wet-transfers
6. Carefully press out any excess liquid and bubbles. (Use the cloth and the cotton bud.)

wet-transfers
7. Ideally, leave it to dry for 6-8 hours.

wet-transfers
8. Carefully remove the transparent transfer film.

wet-transfers
9. Clean off any traces of transfer glue with a wet cloth.